ST-Link V2 CLONE mini USB Programmer Debugger for STM8 STM32 device ( Random Color, different pin-out)
Italy
Nexive: orders below 24,98 € shipping costs is 2,50 € - shipping times of 7 - 15 working days
Nexive: orders above 24,99 € shipping is FREE - shipping times of 7 - 15 working days
DHL: orders of less than euro 24,98 € shipping costs is 9,90 € - shipping times of 2 - 3 working days
DHL: orders between 24,99 € and 49,98 € shipping costs is 7,90 € - shipping times of 2 - 3 working days
DHL: orders between 49,99 € and 98,99 € shipping costs is 5,90 € - shipping times of 2 - 3 working days
DHL: orders above 99 € shipping is FREE - shipping times of 2 - 3 working days
Europe
DHL: fixed cost of euro 15,99 € for the whole European territory - shipping times of 2 - 3 working days
Poste Italiane Registered: 250 gr. max weight limit and the cost varies from 7,10 € to 12,70 € - shipping times of 2 - 4 weeks.
Rest of the World
DHL: fixed cost of 39,99 € for the rest of the world - shipping times of 2 - 3 working days
Poste Italiane Registered: 250 gr. max weight limit and the cost varies from 8,40 € to 16,50 € - shipping times of 2 - 4 weeks.
ST-Link V2 CLONE mini USB Programmer Debugger for STM8 STM32 device ( Random Color, different pin-out)
DESCRIPTION
The Mini ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 micro controller families.
The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 micro controller.
Fully compatible with ST version, including automatic firmware updates.
Device Pin-OUT
The pin-out of this model is:
- RST
- SWCLK
- SWIM
- SWDIO
- GND
- GND
- 3.3V
- 3.3V
- 5.0V
- 5.0V
Compatible with the following environments:
-
ST -LINK Utility 2.0 and higher
-
STVD 4.2.1 and higher
-
STVP 3.2.3 and higher
-
IAR EWARM V6.20 and higher
-
IAR EWSTM8 V1.30 and higher
-
KEIL RVMDK V4.21 and higher
Detail
Compatible with automatic updates of the firmware, firmware version installed : V2.J17.S4 or major
Compatible 5V
Interface standard 10 pin 2.54mm
Housing Aluminium
Use the administrator mode to install the driver on Vista, WIN7 , WIN8
Device Manager will show " STMicroelectronics STLink dongle " from the successful installation.
Please open driver and code by administrator mode in WIN WISTA/WIN 7/WIN 8 system.if display "STMicroelectronic STLink dongle" in device manager,that is say install success.
Specific References
Be the first to ask a question about this product!