L298N Motor driver module
€5.90
Tax included
Italy
Nexive: orders below 24,98 € shipping costs is 2,50 € - shipping times of 7 - 15 working days
Nexive: orders above 24,99 € shipping is FREE - shipping times of 7 - 15 working days
DHL: orders of less than euro 24,98 € shipping costs is 9,90 € - shipping times of 2 - 3 working days
DHL: orders between 24,99 € and 49,98 € shipping costs is 7,90 € - shipping times of 2 - 3 working days
DHL: orders between 49,99 € and 98,99 € shipping costs is 5,90 € - shipping times of 2 - 3 working days
DHL: orders above 99 € shipping is FREE - shipping times of 2 - 3 working days
Europe
DHL: fixed cost of euro 15,99 € for the whole European territory - shipping times of 2 - 3 working days
Poste Italiane Registered: 250 gr. max weight limit and the cost varies from 7,10 € to 12,70 € - shipping times of 2 - 4 weeks.
Rest of the World
DHL: fixed cost of 39,99 € for the rest of the world - shipping times of 2 - 3 working days
Poste Italiane Registered: 250 gr. max weight limit and the cost varies from 8,40 € to 16,50 € - shipping times of 2 - 4 weeks.
10.9031.0011
L298N Dual Bridge DC and STEPPER motorpower module
Description :
This L298N driver modules based on the L298N ST company's chip, candirectly drive two 3-30 V dc motor.Internal DC regulatoc can provides 5 V for output interface and cangive 5 V power supply circuit system.
I/O of L298N cn be controlled by 3,3V MCU output signal and can alsocontrol 2 phase step motor with an appropriate external logic controlinterface..
Feture:
- Driver: L298N Dual H Bridge DC Motor Driver IC
- Power supply for motor power : +5 V ~ +35 V; ( minimum 7V powersupply if internal 78M95 regulator is used )
- Maximum output current : 2A
- Internal current for logic part : 36mA max
- Control signal input voltage range:
Low:-0.3V
High: 2.3V - Enable signal input voltage range:
Low: -0.3
High: 2.3V - Maximum power consumption: 20W (when the temperature T = 75 Deg C)
- Storage temperature: -25 Deg C ~ +130 Deg C
- Direction and Power LED indication
- Driver Board Size: 55mm * 60mm * 30mm
- Drive plate Weight: 33g
Be the first to ask a question about this product!