CNC 1 Axis 3.5A TB6560 Stepper Stepping Motor Driver
Italy
Nexive: orders below 24,98 € shipping costs is 2,50 € - shipping times of 7 - 15 working days
Nexive: orders above 24,99 € shipping is FREE - shipping times of 7 - 15 working days
DHL: orders of less than euro 24,98 € shipping costs is 9,90 € - shipping times of 2 - 3 working days
DHL: orders between 24,99 € and 49,98 € shipping costs is 7,90 € - shipping times of 2 - 3 working days
DHL: orders between 49,99 € and 98,99 € shipping costs is 5,90 € - shipping times of 2 - 3 working days
DHL: orders above 99 € shipping is FREE - shipping times of 2 - 3 working days
Europe
DHL: fixed cost of euro 15,99 € for the whole European territory - shipping times of 2 - 3 working days
Poste Italiane Registered: 250 gr. max weight limit and the cost varies from 7,10 € to 12,70 € - shipping times of 2 - 4 weeks.
Rest of the World
DHL: fixed cost of 39,99 € for the rest of the world - shipping times of 2 - 3 working days
Poste Italiane Registered: 250 gr. max weight limit and the cost varies from 8,40 € to 16,50 € - shipping times of 2 - 4 weeks.
CNC Router Single 1 Axis 3.5A TB6560Stepper Stepping Motor Driver Board
Feature:
- Very easy to use, no instructions, all of use are marked on theboard
- Definitely use the new chips imported from Japan, Toshiba TB6560
- With large heat sink to ensure good heat dissipation
- Input signal high-speed optocoupler isolation, guarantee notlosing steps
- Semi-flow mode adjustable, semi-flow current adjustable, not thegeneral design on the market, with a variety of semi-flow model andsemi-flow current setting function
- Attenuation model adjusted for all the motors can be locked whenno noise
- Ultra-small, the overall size: 62mm * 75mm, installation of fourmechanical positioning hole size: 65mm * 55, hole size 3mm
- The form of stud-type connectors and an optional plug-in
Rated voltage | DC 12V-24V |
Maximum current | 3.5 A |
Current adjustable (CurrentSettings) | 0.5A, 1A, 1.5A, 1.8A, 2A.2.5A,3.5A |
Subdivision adjustable(Excitation Mode) | 1, 2, 8, 16 |
Attenuation adjustable (DecayMode) |
|
Automatic half current setting(Torque Settings) |
|
Package List:
- 1pc SainSmart Single 1 Axis 3.5A TB6560 Stepper Motor Driver
- 2pc 4 Pole Motor & Control Connector
- 1pc 2 Pole Power Connector
NOTE:Three Terminals have been installed on the board!
Be the first to ask a question about this product!