USBASP AVR Programmer
Nexive: orders below 24,98 € shipping costs is 2,50 € - shipping times of 7 - 15 working days
Nexive: orders above 24,99 € shipping is FREE - shipping times of 7 - 15 working days
DHL: orders of less than euro 24,98 € shipping costs is 9,90 € - shipping times of 2 - 3 working days
DHL: orders between 24,99 € and 49,98 € shipping costs is 7,90 € - shipping times of 2 - 3 working days
DHL: orders between 49,99 € and 98,99 € shipping costs is 5,90 € - shipping times of 2 - 3 working days
DHL: orders above 99 € shipping is FREE - shipping times of 2 - 3 working days
DHL: fixed cost of euro 15,99 € for the whole European territory - shipping times of 2 - 3 working days
Poste Italiane Registered: 250 gr. max weight limit and the cost varies from 7,10 € to 12,70 € - shipping times of 2 - 4 weeks.
Rest of the World
DHL: fixed cost of 39,99 € for the rest of the world - shipping times of 2 - 3 working days
Poste Italiane Registered: 250 gr. max weight limit and the cost varies from 8,40 € to 16,50 € - shipping times of 2 - 4 weeks.
TheseAVR programmers are based on Thomas Fischl's USBaspdesign and connect to your computer's USB port.Not only are they quite compact (70x20mm), but the design is reallyelegant. The USB interface is achieved by using an atmega8 processorand the rest is done in firmware.Beingan Open source hardware (OSHW) project, released under the GNU GeneralPublic License, you are free to download the schematic and firmwarefrom Thomas's website, but then you have a chicken and egg problem. Inorder to load the USBASP firmware onto the atmega8 on the programmer,yes you guessed it, you need an AVR programmer. Much easier to buy onefully built and programmed.Someof the features include:
- Allows you to read or write the microcontroller EEPROM, firmware,fuse bits and lock bits
- Support for Windows, Mac OS X and Linux (will work on vista andWindows 7)
- 5 KB/sec maximum write speed
- Software controlled SCK option to support targets with low clockspeed (< 1.5MHz)
- 10 pin ISP interface (conforms to standard ICSP 10-pin pinout)
This post describesthe new driver and how to install it. The driver is available for both32 and 64 bit platforms.
On Linux And Mac OS X no kernel driver is required, just use AVRdudeand specify the correct port.Theprogrammer will work with a wide variety of Atmel AVR microcontrollersincluding the Atmega8a andAtmega168a.
A full list is available on the specifications tab.The programmer will also work with a variety of software including:
- AVRdude -Version 5.2 or later. AVRdude is available for many platforms.
- Khazama AVRProgrammer - An AVRdude GUI for MS Windows
- BASCOM-AVR -Version 18.104.22.168 or later
- eXtreme Burner -An easy to use GUI application for MS Windows.
USBasp - USBprogrammer for Atmel AVR controllersSize:70 x 20 x 9mmSupported Software:AVRDude 5.2 or higherSupported Microcontrollers:Mega SeriesATmega8ATmega8AATmega48ATmega48AATmega48PATmega48PAATmega88ATmega88AATmega88PATmega88PAATmega168ATmega168AATmega168PATmega168PAATmega328ATmega328PATmega103ATmega128ATmega128PATmega1280ATmega1281ATmega16ATmega16AATmega161ATmega162ATmega163ATmega164ATmega164AATmega164PATmega164PAATmega169ATmega169AATmega169PATmega169PAATmega2560ATmega2561ATmega32ATmega32AATmega324ATmega324AATmega324PATmega324PAATmega329ATmega329AATmega329PATmega329PAATmega3290ATmega3290AATmega3290PATmega64ATmega64AATmega640ATmega644ATmega644AATmega644PATmega644PAATmega649ATmega649AATmega649PATmega6490ATmega6490AATmega6490PATmega8515ATmega8535
Tiny SeriesATtiny12ATtiny13ATtiny13AATtiny15ATtiny25ATtiny26ATtiny45ATtiny85ATtiny2313ATtiny2313AClassic SeriesAT90S1200AT90S2313AT90S2333AT90S2343AT90S4414AT90S4433AT90S4434AT90S8515AT90S8535
Be the first to ask a question about this product!