ESP8266 ESP-01S Serial WIFI Wireless Transceiver Module Send Receive AP+STA
Nexive: orders below 24,98 € shipping costs is 2,50 € - shipping times of 7 - 15 working days
Nexive: orders above 24,99 € shipping is FREE - shipping times of 7 - 15 working days
DHL: orders of less than euro 24,98 € shipping costs is 9,90 € - shipping times of 2 - 3 working days
DHL: orders between 24,99 € and 49,98 € shipping costs is 7,90 € - shipping times of 2 - 3 working days
DHL: orders between 49,99 € and 98,99 € shipping costs is 5,90 € - shipping times of 2 - 3 working days
DHL: orders above 99 € shipping is FREE - shipping times of 2 - 3 working days
DHL: fixed cost of euro 15,99 € for the whole European territory - shipping times of 2 - 3 working days
Poste Italiane Registered: 250 gr. max weight limit and the cost varies from 7,10 € to 12,70 € - shipping times of 2 - 4 weeks.
Rest of the World
DHL: fixed cost of 39,99 € for the rest of the world - shipping times of 2 - 3 working days
Poste Italiane Registered: 250 gr. max weight limit and the cost varies from 8,40 € to 16,50 € - shipping times of 2 - 4 weeks.
This is WiFi serial transceiver module, based on ESP8266 SoC which has integrated
TCP/IP protocol stack.
It optimizes the filter circuit and reduces power consumption. It is compatible with ESP-01 and it is an upgraded and improved version of ESP-01 module.
It is TTL serial communication interface and its parameters can be set by AT command. It is widely used in networking, smart home project when it is connected to the wifi router. It can be used for remote monitoring of home appliances, bedroom temperature and humidity, and controlling home appliances by the mobile phone.
With the help of ESP-01 Adapter module, it can be connected directly with the Arduino board and other 5V MCU development board.
- Working frequency: 2400 - 2484 MHz
- Working voltage: 3.0 - 3.6VDC
- Working current: 200mA(MAX)
- Serial port baud rate: 115200 (default), can be modified to other values by AT command
- Serial communication format: 8N1
- On-board flash capacity: 1M bytes
- Antenna Type: Built-in PCB antenna is available.
- Wireless Network Mode: station / softAP / SoftAP + station
- Wireless criteria: 802.11 b / g / n
- WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
- It is very easy to design projects by AT command
When connecting with Arduino, you need to add 5V / 3.3V level converter circuit
Home automation, sensor networks, industrial wireless control, smart car.