ST-Link V2 mini USB Programmer Debugger for STM8 STM32 device ( Random Color)
€12.21
Tax included
Italy
Nexive: orders below 24,98 € shipping costs is 2,50 € - shipping times of 7 - 15 working days
Nexive: orders above 24,99 € shipping is FREE - shipping times of 7 - 15 working days
DHL: orders of less than euro 24,98 € shipping costs is 9,90 € - shipping times of 2 - 3 working days
DHL: orders between 24,99 € and 49,98 € shipping costs is 7,90 € - shipping times of 2 - 3 working days
DHL: orders between 49,99 € and 98,99 € shipping costs is 5,90 € - shipping times of 2 - 3 working days
DHL: orders above 99 € shipping is FREE - shipping times of 2 - 3 working days
Europe
DHL: fixed cost of euro 15,99 € for the whole European territory - shipping times of 2 - 3 working days
Poste Italiane Registered: 250 gr. max weight limit and the cost varies from 7,10 € to 12,70 € - shipping times of 2 - 4 weeks.
Rest of the World
DHL: fixed cost of 39,99 € for the rest of the world - shipping times of 2 - 3 working days
Poste Italiane Registered: 250 gr. max weight limit and the cost varies from 8,40 € to 16,50 € - shipping times of 2 - 4 weeks.
DESCRIPTION
The Mini ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 micro controller families.
The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 micro controller.
Fully compatible with ST version, including automatic firmware updates.
Device Pin-OUT
The pin-out of this model is:
- RST
- SWDIO
- GND
- GND
- SWIM
- SWCLK
- 3.3V
- 3.3V
- 5.0V
- 5.0V
Compatible with the following environments:
ST -LINK Utility 2.0 and higher
STVD 4.2.1 and higher
STVP 3.2.3 and higher
IAR EWARM V6.20 and higher
IAR EWSTM8 V1.30 and higher
KEIL RVMDK V4.21 and higher
Detail
Compatible with automatic updates of the firmware, firmware version installed : V2.J17.S4 or major
Compatible 5V
Interface standard 10 pin 2.54mm
Housing Aluminium
Use the administrator mode to install the driver on Vista, WIN7 , WIN8
Device Manager will show " STMicroelectronics STLink dongle " from the successful installation.
Please open driver and code by administrator mode in WIN WISTA/WIN 7/WIN 8 system.if display "STMicroelectronic STLink dongle" in device manager,that is say install success.